(307) 202-5245
English & Spanish Spoken
Mon-Fri: 8am-5pm EST
(307) 202-5245
English & Spanish Spoken
Mon-Fri: 8 AM-5 PM EST
Pay via ACH or Wire & Get an Extra 2% OFF ā On Top of Current Discounts!
(307) 202-5245
English & Spanish Spoken
Mon-Fri: 8am-5pm EST
(307) 202-5245
English & Spanish Spoken
Mon-Fri: 8 AM-5 PM EST
Product Description Outdoor tank farms, loading racks, refinery pads and rail yards in cold climates need an emergency station that still flows on ...
View full detailsProduct Description A combination safety shower set out in a yard, on a loading dock or at a remote job site takes the full weather, and the person...
View full detailsProduct Description The Haws 8606SS is the dual-entry, walk-through version of the Haws stainless steel shower booth. With an opening on both sides...
View full detailsProduct Description A standard enclosed shower booth has a raised threshold and an eyewash mounted for a standing user, which leaves a worker in a ...
View full detailsProduct Description Some sites cannot get by with an open pipe-frame station in the corner of the floor. Pharmaceutical plants, plating and picklin...
View full detailsProduct Description The Haws 8356WCW pairs two things facility planners often want together: a drain pan that keeps eyewash testing off the floor, ...
View full detailsProduct Description Concrete block, poured concrete and other solid walls cannot be cut open for a recessed cabinet, which usually rules out the ba...
View full detailsProduct Description A recessed station with a drain pan normally needs a waste line inside the wall, and plenty of existing buildings simply do not...
View full detailsProduct Description Weekly activation testing is where many wall-mounted eyewash stations make a mess, with flushing water running down the wall an...
View full detailsProduct Description Some rooms make a ceiling shower drop difficult: open structure overhead, a finished ceiling nobody wants to open, or a renovat...
View full detailsProduct Description Schools, university labs, hospitals and public buildings often need a combination emergency station in a corridor or classroom ...
View full detailsProduct Description Acid etching rooms, plating shops, chlorine and caustic storage, and chemical feed rooms at water treatment plants eat through ...
View full detailsProduct Description Standard heat-traced stations carry a Class I, Division 2 rating. Refinery process units, fuel transfer areas and solvent opera...
View full detailsProduct Description Plants wired for 220 volt service, including export projects and facilities that standardize heat trace circuits on 220 VAC, do...
View full detailsProduct Description Heat-traced stations solve the freezing problem, but in sun-baked yards and on sites that swing from frost to summer heat, wate...
View full detailsProduct Description Remote well pads, pipeline stations, water treatment yards and other unattended outdoor sites cannot count on someone noticing ...
View full detailsProduct Description When a safety manager at a 220 volt site asks what happens if the heat trace loses power on the coldest night of the year, the ...
View full detailsProduct Description Many plants, offshore-style skids, export projects and facilities wired for 220 volt equipment have no convenient 120V circuit ...
View full detailsProduct Description For outdoor process areas, refineries, gas plants and chemical unloading pads where standard 120V service is already run to the...
View full detailsProduct Description Quarries, tank farms, rail yards, fuel depots and outdoor loading areas in cold climates need an emergency station that still f...
View full detailsProduct Description The Haws 8320CRP is the corrosion-resistant combination station for sites that would rather have a plastic bowl than metal. It ...
View full detailsProduct Description Not every site needs, or wants, an eyewash bowl. In tight aisles, along process lines and in shops where a bowl would collect d...
View full detailsProduct Description Schools, university labs, hospitals, government buildings and any workplace with employees who use wheelchairs need an emergenc...
View full detailsProduct Description Bare galvanized pipe holds up in a dry warehouse, but in fertilizer storage, water treatment chemical rooms, mining wash bays a...
View full detailsShop emergency eyewash and safety showers for laboratories, manufacturing facilities, chemical handling areas, schools and industrial workplaces. Our selection of Haws emergency equipment includes floor-mounted combination stations, barrier-free designs, recessed cabinets and enclosed shower booths.
Choose an emergency shower and eyewash station based on your facilityās exposure hazards, available space, water supply and operating environment. Compare galvanized steel, stainless steel and corrosion-resistant configurations, with freeze-protected options for cold-weather installations. Need help matching equipment to your project specifications? Request a quote before ordering.
An eyewash station provides flushing streams for the eyes; an eye/face wash also covers the face. A safety shower delivers a larger drenching pattern for the body. A combination station provides both functions at one location. Your workplace hazard assessment determines which equipment is required.
Confirm the exposure hazards, equipment certification, mounting space, accessibility needs, supply pressure and available water flow. Also review drainage, flushing-water temperature and any electrical requirements. Have the installer check the selected modelās drawings before ordering.
Selected models are designed for outdoor or freezing conditions. Heat-traced units require the specified electrical supply, while bury-valve systems require installation below the local frost line. Do not assume a standard combination station is freeze protected.
Yes. This collection includes barrier-free floor-mounted stations, cabinet configurations and a wheelchair-accessible booth. Correct installation heights, clearances and control positions are essential; follow the requirements for the exact model.
Not necessarily. Freeze protection keeps equipment from freezing; it does not automatically provide the flushing-water temperature required for emergency use. ANSI/ISEA guidance identifies tepid water as 60ā100°F, with equipment supporting a minimum 15-minute flushing period. Have your project professional confirm whether separate water-temperature controls are needed.
Added to your cart:
Compare products
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}